Western Trap Machine Forum: Trap Machine Bulletin Board » How to convert a Western skeet machine to 12 V DC?

Home » Public Forums » Trap Machine Bulletin Board » How to convert a Western skeet machine to 12 V DC?

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

How to convert a Western skeet machine to 12 V DC? [message #8]

Wed, 08 January 2014 19:24

Western Retro
Messages: 43
Registered: April 2013

Member
Administrator

Western Single Stack Skeet Machines run on 110 V AC. I'm working on a project to convert a Skeet Machine to run on 12 V DC. In the past I've run these off a 1500 watt inverter with a deep cycle battery. Works fine and gives several hours of operation. Wondering if a starter motor like this picture would work better. Starters don't like to run all the time, draw large amounts of power and can get hot. Don't want to burn out the gear case and blow the motor as well. Another approach may be to use a generator/starter like the old tractors had. Also thinking the wheel chair motors or 12v power winch might work. If you have any suggestions on good, better best ways forward I'd appreciate your feedback.

Ian Brotherston Western Retro

Attachment: DCP02441.jpg
(Size: 150.23KB, Downloaded 821 times)

Report message to a moderator

[Message index]

How to convert a Western skeet machine to 12 V DC?

By: Western Retro on Wed, 08 January 2014 19:24

Previous Topic:	Just finished a V1577 rebuild
Next Topic:	NSSF Target Shooting Activity Report

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Apr 18 17:03:44 PDT 2024